Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Products
Product Center
DB9 Terminal Block 120 Ohm termination resistor
Category:
CAN Bus Cable Adapter
Detail
DB9 Terminal Block 120 Ohm termination resistor
DB9 Female 9-Pin to Terminal Block CAN Terminator
CAN Bus Adapter DB9 to Terminal Block
DB9 CAN Terminator
DB9 to 9-Pin Terminal Block Adapter, 120 Ohm termination resistor between CAN_H and CAN_L
9-pin D-sub terminal block adaptor, 120 Ω termination resistor between CAN_H and CAN_L
The CAN terminator can be used where the CAN cable or CAN node at the end does not have internal termination.
Push Button terminal is easy to use and re-wiring
No need Soldering or Screw Drivers
Pin Map : 1 : 1
Resistor : 120 Ohm
Terminal Pitch : 2.54mm
Wire AWG : 14 to 28AWG
Connector ： DB9 Female
