Serial port to CAN module, RS232 RS485 to CAN configuration method

The serial port to CAN module (RS232/485 to CAN) is a powerful tool to connect the serial port device and the CAN bus device. It can connect the serial port networking device to the CAN bus network, thereby processing, collecting and analyze.

Next, I will use Premier Cable's serial port to CAN module and PCM Config software to introduce the configuration method of the serial port to CAN module (RS232/485 to CAN).

Serial to CAN configuration preparation

1

Download and install the PCM Config software.

The PCM Config software can set the parameters of the serial port to CAN module by itself, including the conversion mode of the module, serial port parameters, CAN bus parameters, 232/485 function switching, etc.

Serial port to CAN module (RS232/485 to CAN) configuration method

2

Configuration preparation:

When the serial port to CAN module is powered on, tap the reset button at one end of the DB9 interface of the module with the thimble, and the COM light and CAN light of the module flash alternately, indicating that the module enters the configuration mode.

3

Connect the RS232 interface or RS485 interface of the module to the PC. Enter the device manager to find the serial number

4

Software connection:

When the serial port to CAN module enters the configuration mode and is normally connected to the PC through the serial port, open the "RS232/485 Config Tools" software in the CD to configure the module.

After entering the software, select the serial port number connected to the serial port to CAN module, and click "Connect Device" to establish the connection.

If the user does not know the serial port number, it can be checked by entering the device manager of the PC. After clicking "Connect", the interface pops up "Read parameters successfully", indicating that the current configuration of the module has been read.

Premier Cable CO LTD is a cable factory with 400 workers, we also make USB serial cable ,  USB to RS232 RS485 cable, OEM Cable and Wire Harness

For different application, we also make the DB9 connector and RS232 Cable angled,  like right angle RS232 Cable, left angle RS232 Cable, up angle RS232 Cable, down angle RS232 Cable

Welcome to your inquiry or visit our  Website : www.premier-cable.net

Our cables can be used for below industry or applications :

RS232/422/485 TO USB Converter

RS-232/422/485 to CAN Converter

RS232 RS485 to CAN BUS  Converter  

USB Can Bus OBD Diagnostic Interface

Industrial CAN-bus communication card

RS232 to CAN BUS converter Serial Port

PCAN-USB Adapter PC to CAN Bus Interface

Tel : 0086-0139-2949-7934

 
Skype : james198585 

Email :  James@premier-cable.net

 
Email :  sales@premier-cable-mfg.com