News Center

DB9 Curly Cable manufacturers take you to understand the classification of cable joints


The DB9 Curly Cable manufacturer tells you that the cable connector is also called the cable head. After the cable is laid, in order to make it a continuous line, each segment of the line must be connected as a whole, and these connection points are called cable joints. The DB9 Curly Cable manufacturer tells you that the cable joint in the middle of the cable line is called the middle joint, and the cable joints at both ends of the line are called the terminal head. The cable joint is used to lock and fix the incoming and outgoing wires, and play the role of waterproof, dustproof and anti-vibration.

Cheap DB9 Curly Cable Manufacturers china
The DB9 Curly Cable manufacturer tells you that its main function is to make the line unobstructed, keep the cable sealed, and ensure the insulation level at the cable joint to make it run safely and reliably. If the seal is not good, not only will oil leak cause the oil-impregnated paper to dry up, but moisture will also penetrate into the cable interior, reducing its insulation performance.
DB9 Curly Cable manufacturers tell you that it can be divided into indoor and outdoor types according to the installation site.
DB9 Curly Cable manufacturers tell you that according to the production and installation materials, it can be divided into heat shrinkable (the most commonly used one), dry package, epoxy resin casting and cold shrinkage.
According to the wire core material, it can be divided into copper core power cable head and aluminum core power cable head.
DB9 Curly Cable manufacturers tell you that there are plastic cable joints and metal cable joints according to the joint material. DB9 Curly Cable manufacturers tell you that metal cable joints are divided into porous metal cable waterproof joints, anti-bending metal cable joints, double locking metal cable waterproof joints, plastic hose cable joints, metal hose cable joints, etc.

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.