Cable Assembly Micro-Fit manufacturers take you to understand the installation of cable assemblies
Cable Assembly Micro-Fit Manufacturers tell you that there are three main ways to connect cable assemblies: 1. Direct welding: Cable Assembly Micro-Fit Manufacturers tell you that the inner conductor of the cable and the inner conductor of the connector; the outer conductor of the semi-rigid cable and the inner conductor of the connector The outer conductor of the connector is soldered and connected, and special assembly tools are required. Advantages: good connection line performance; high rigidity of the welding structure and good integrity; many types of welding methods, the wide applicability of welding processes, and relatively easy and realistic.
2. Crimping type: Cable Assembly Micro-Fit Manufacturers tell you that the cable shielding layer is crimped and fixed on the connector with special crimping pliers, which have a simple structure, and fast assembly speed, good consistency, and high reliability. , the structure is suitable for flexible cables. Advantages: 1. Simple structure; 2. Fast assembly speed; 3. Good consistency; 4. High reliability.
3. Clamping type: Cable Assembly Micro-Fit Manufacturers tell you that when assembling connectors and cables, the nut structure is used to connect and fix the cable shielding layer with the outer conductor of the connector shell through the clamping mechanism. This structure is suitable for flexible cables. with feeder cables. Advantages: 1. It is very convenient to press copper terminals, and it can easily realize chain bridging in line with actual requirements; 2. When the wiring positions of the wires are closely adjacent, it can improve the insulation safety and prevent the wires from bifurcating; 3. It can make The wire is easier to insert into the terminal.
The above is the Cable Assembly Micro-Fit manufacturer's introduction and analysis of the installation of cable assemblies, hope it helps you.