Cable Assembly Micro-Fit manufacturers take you to understand the installation method of cable assembly
There are three main ways to install cable assemblies: 1. Direct welding: Cable Assembly Micro-Fit Manufacturers tell you that the inner conductor of the cable and the inner conductor of the connector; the outer conductor of the semi-rigid cable and the outer conductor of the connector are soldered and connected, which requires Use special assembly tools. Advantages: 1. Good connection. 2. The welded structure has high rigidity and good integrity. 3. There are many types of welding methods, and the welding process has wide applicability and is relatively easy to be realistic.
2. Crimping type: Cable Assembly Micro-Fit Manufacturers tell you that the cable shielding layer is crimped and fixed on the connector with special crimping pliers, which have a simple structure, fast assembly speed, good consistency, and high reliability. , the structure is suitable for flexible cables. Advantages: 1. Simple structure. 2. Fast assembly speed. 3. Good consistency; 4. High reliability.
3. Clamping type: Cable Assembly Micro-Fit Manufacturers tell you that when assembling connectors and cables, the nut structure is used to connect and fix the cable shielding layer with the outer conductor of the connector shell through the clamping mechanism. This structure is suitable for flexible cables. with feeder cables. Advantages: 1. It is very convenient to press copper terminals, and it can easily realize chain bridging in line with actual requirements. 2. When the wiring positions of the wires are closely adjacent, it can improve the insulation safety and prevent the wires from bifurcating. 3. Makes the wire easier to insert into the terminal.
The above is the Cable Assembly Micro-Fit manufacturer's introduction and analysis of the installation method of the cable assembly, hope it helps you.