Remote Site Power Monitor cable adapter

Battery Monitoring system cable adapter

Server Rack Battery cable adapter

Energy Meter cable adapter

 
1. The monitoring host is the main body of the monitoring equipment, which can monitor multiple battery packs at the same time.

2. Estimate the remaining capacity of the battery and evaluate the quality of the battery through short-term discharge of 5-10 minutes: it is convenient for the maintenance personnel in the computer room to understand the battery condition.

3. It has multiple alarm functions: it can issue an alarm in due course and stop discharging.

4. Monitor and record battery float charge and charge and discharge conditions: BCSU-240C can save you the trouble of test record, it will automatically collect the collected data into various test curves - characteristic comparison chart, total voltage curve, each The single voltage curve, voltage bar curve, memory data table, etc. are all clear at a glance, and the test report is automatically generated and can be printed at any time.

5. By connecting the BDCT, the entire battery pack can be discharged for a long time, and the actual capacity of each battery can be measured.

6. Fixed type: easy to operate, a host monitors a group of 240 battery packs online in real time. It can be networked with computer or centralized monitoring.

1. Measurement function: It can measure and record the total voltage, total current, and voltage of each single battery at any time (can be set to measure once in 6-30 seconds).

2. It has the function of recording during floating charging: it can record the battery status during floating charging, and make "equal charging" suggestions in due course (an external battery detector must be selected).

3. Abnormal alarm: When the voltage and temperature of the battery pack are abnormal, an alarm will be issued.

4. The main machine can work independently or in parallel with multiple machines.

5. The remaining capacity can be automatically calculated to provide the remaining capacity of the battery pack.

6. It can list the characteristic curve and characteristic comparison chart, and judge the pros and cons of the battery

7. Recording function: It can record the voltage and current of the battery pack during floating charging and charging and discharging.

1. Conductive band type current conduction type: This sensor can transmit the current data passing through the battery to the battery pack capacity monitor.

2. It has a circuit for measuring the voltage of the single battery (0-3V).

3. It has a circuit for measuring the total voltage and total current of each battery pack.

4. Computer connection function: It can be connected with a computer, collect charging and discharging parameters, and perform battery performance evaluation and analysis. It can be networked with centralized power monitoring and has remote monitoring functions.

5. With LCD backlight display, real-time display of various voltage, current, temperature and other information on site.

6. Intelligent digital panel input, faster setting query and more convenient operation.

7. The signal cable is 0.3mm PVC wire.

8. Protection device: each circuit is contacted by gold-plated copper head and has over-current protection device.

9. Memory device: The internal memory device of this machine adopts FLASH ROM design, and the memory storage capacity is up to 10 years.