News Center

Campbell CR6 Data Logger

Campbell CR6 Data Logger


The CR6 series Data Loggers are powerful and can be used as the core components of data acquisition systems.


CR6 integrates all the advantages of our previous Data Loggers and adds fast communication interface, low power consumption, built-in USB, portable, higher analog input accuracy and resolution.


CR6 series Data Loggers introduce a new concept of universal interface (U): a kind of U interface that can connect any sensor (analog signal, digital signal or smart sensor, etc.) to any U interface.


This is also our first multi-function data logger with static vibrating wire measurements.


Features and Benefits :


Strong versatility, providing a variety of data collection methods


User-defined "U" interface type: analog or digital, input or output


The static vibrating wire measurement adopts the manufacturer's unique spectrum analysis patent technology


Current, voltage overvoltage protection (for all terminals)

Flexible power supply: solar panel, DC power, 12V battery, USB

Including network communication interface Ethernet 10/100

Plug-in type integral terminal block: wiring is easier

SD card: Extended memory

Supports RS232 and RS485 serial sensors

Supports CPI communication, supports Campbell high-speed sensors and distribution modules (CDM)

CRBasic or SCWin programming, compatible with PakBus protocol

The operating system is the same as the popular CR1000, CR3000

USB micro B : Directly connect to computer, USB2.0, 12Mbps

Network communication: 10/100 network, RJ-45 interface

CS I/O Port: Connects Campbell Modem and Display Functions

CPI port: Extensible port using CDM device

Battery terminal: 12V regulated power supply or 12V rechargeable battery (UPS mode)

Charging terminal: DC converter 16-32V, solar panel 12V or 24V

2 12V switching power supply terminals: power supply for sensors or communication equipment, 1100 mA@20℃

12 V continuous supply terminals

Program control terminal:

12 U terminals and 4 C terminals can be controlled by the program to complete the following functions.


Campbellsci  :   RJ45 Male to Terminal Dongle Data Cable

CR6 datalogger  


CR1000X datalogger  


Data logger to RS-232 sensor Cable


Campbellsci RJ45 Male to Terminal Dongle Data Cable can be plugged into the RJ45 RS-232 port on a CR6 or CR1000X datalogger to connect the data logger to an RS-232 sensor.


Tel : 0086-0139-2949-7934
Skype : james198585 

Email :
Email :
Website :



Related News

What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.

CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.

Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.

Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."

What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.

The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.