News Center

Motorola Programming Cable RS232 RJ45 manufacturers take you to understand the reasons for cable aging

1. Cables will be damaged by External force. The Motorola Programming Cable RS232 RJ45 Manufacturers tell you that from the analysis of operation in recent years, especially in areas with rapid economic development, a considerable number of cable failures are caused by mechanical damage.

Motorola Programming Cable RS232 RJ45 on sales
2. The insulation of the cable will be damp. The Motorola Programming Cable RS232 RJ45 Manufacturers tell you that this is also very common and usually occurs at cable joints in direct burial or in pipes.
For example, the Motorola Programming Cable RS232 RJ45 Manufacturers tell you that unqualified cable joints and making joints under humid weather conditions will cause the joints to enter water or mix with water vapor. Under the action of an electric field for a long time, the insulation strength of the cable will be gradually damaged and cause malfunction.
The above is the Motorola Programming Cable RS232 RJ45 manufacturer's introduction and analysis of the reasons for the cable aging, hope it helps you.

Related News

What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.

CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.

Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.

Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."

What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.

The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.